Protecting Your Hands on the Job

Work gloves play an important role in protecting workers' hands from injury. To ensure safety and optimize their efficacy, it is imperative to grasp the manufacturing process and the correct utilization of work gloves. In this article, you will find a brief about work gloves and their uses and materials. Get a fit and comfortable work gloves now at www.cheefatt.com

Manufacturing Process:

a. Material Selection: Depending on the intended application and the specific hazards workers may encounter, work gloves can be crafted from a variety of materials, including leather, synthetic fibers (such as nylon, polyester, or spandex), and specialized coatings (like latex or nitrile).

b. Cutting and Stitching: The chosen materials are meticulously cut into pattern pieces that align with the glove design. These pieces are then skillfully stitched together, utilizing specialized sewing machines, to ensure durability and a proper fit.

c. Quality Control: Stringent quality control measures are integrated throughout the manufacturing process to guarantee that the gloves adhere to safety standards. These measures include inspections to detect defects, assess sizing accuracy, and test material strength and durability.

Usage Guidelines:

1. Proper Selection: It is essential to select work gloves that are suitable for the specific task and associated hazards. Factors to consider include the material's resistance to chemicals, cut resistance, and grip requirements.

2. Size and Fit: Choose the gloves that is comfortable and fit with your hand, ensuring both security and dexterity. Gloves that are excessively loose or tight can compromise performance and safety.

3. Inspection: Prior to each use, meticulously examine gloves for any indications of damage, such as tears, holes, or areas showing signs of wear. Avoid utilizing gloves with visible defects, as they may not furnish adequate protection.

4. Donning and Doffing: Adhere to correct procedures for putting on and removing gloves to minimize contamination and guarantee a secure fit. Avoid touching the outer surface of the gloves, especially after handling hazardous substances.

5. Care and Maintenance: Comply with manufacturer recommendations for cleaning and maintaining gloves. This may involve handwashing, machine-washing, or disinfection, depending on the type of glove. Proper maintenance serves to prolong the gloves' lifespan and preserve their protective properties.

The New EN Ratings

If you've ever been wonder about the numbers stated on your gloves, these number show the score that your gloves have been given for each of the hazards tested. You can identify an EN 388 rated glove by viewing the symbol below on the back of the gloves, in the packaging or conformity statement.

Abrasion Resistance (Scale of 1-4)
Each glove's material undergoes pressure testing with sandpaper. In this initial category, safety gloves are rated on a scale of 1-4 based on the number of turns needed for a hole to develop in the material. A higher rating signifies superior abrasion resistance, indicating the glove's ability to withstand wear and tear.

Cut Resistance (Scale of 1-5)
The rating is determined by the number of cycles necessary to cut through the glove at a consistent and constant speed. A higher rating indicates that it took longer for the blade to penetrate the material. In cases where the material dulls the blade, the TDM test (as described below) will be conducted instead.

Tear Resistance (Scale of 1-4)
Each glove is tested by force to see how much is required to create a tear in the material.
A rating of 4 signifies that the gloves are crafted from the strongest material.

Puncture Resistance (Scale of 1-4)
Force is applied to the material to see how much is required for a puncture to occur using a standard size point. The higher number indicate they are more resistant to punctures.

ISO Cut Resistance (Scale of A-F)
The rating is defined by the average load required to cut the material using a straight blade. Gloves rated ‘F’ showed that they required the greatest force of Newtons to cut through. However, gloves with rating ‘A’ means the glove have little cut resistance.

Impact Resistance (Scale of P, F, X)
Impact resistance will only show when the glove is indicated by the scale of P, F, X.  If the gloves did not include the sixth digit as the symbol shown above, the gloves will not claim to have impact protection.

Work gloves stand as indispensable personal protective equipment, ensuring the safety of workers across various industries. As a leading and established Singapore Hardware Store and distributor in the region, Chee Fatt has over decades of experience in distributing a wide range of work glove from renowned brands. For access to an extensive range of high-quality work gloves, you can source any work glove you need from our Singapore hardware store online to discover gloves designed to cater to diverse industry requirements.