DC Impact Driver 1/4'' Hex, 180 NM, Bare Tool, MAKITA (DTD172Z)
Makita
out of stock
SKU #221796
M/C DTD172Z
$343.35
About the Product
- 18V LXT BL Brushless Cordless Wood/Bolt/T-Mode 180 N·m Impact Driver
- Slimmer tool head that enables easy screw-driving in tight corners or confined spaces
- Slimmer tool body due to smaller controller circuit
- Light mode enables to use as a handy light on dark job sites
- Anti-bit wobbling structure; Two ball bearings are used to securely hold the anvil for reduced bit wobbling
*Bare Tool (Battery and charger sold separately)
Specifications:
| Capacity | Machine Screw: M4 – M8 (5/32 – 5/16″) |
| Standard Bolt: M5 – M16 (3/16 – 5/8″) | |
| High Strength Bolt: M5 – M14 (3/16 – 9/16″) | |
| Coarse thread (in length): 22 – 125 mm (7/8 – 4-7/8″) | |
| Wood (Auger Bit): 24 mm (15/16″) | |
| Hex Shank | 6.35 mm (1/4″) |
| No Load Speed (rpm) | Max / Hard / Mid / Soft / Wood / Bolt / T (1) / T (2) mode:: 0 – 3,600 / 3,200 / 2,100 / 1,100 / 1,800 / 3,600 / 2,900 / 3,600 |
| Impacts Per Minute (IPM) | Max / Hard / Mid / Soft / Wood / Bolt / T (1) / T (2) mode:: 0 – 3,800 / 3,600 / 2,600 / 1,100 / 3,800 / 3,800 / N/A / 2,600 |
| Max. fastening torque | 180 Nm (1,590 in.lbs.) |
| Fastening Torque | Hard / Mid / Soft: 170 / 50 / 20 N·m (1,510 / 440 / 180 in.lbs.) |
| Max Output | 290 W |
| Dimensions (L x W x H) | 114 x 81 x 189 mm (4-1/2 x 3-3/16 x 7-7/16″) |
| Net weight | 1.2 – 1.5 kg (2.6 – 3.3 lbs.) |
Weight
1.2000 kgs
Battery /Charger Included
No
Corded / Cordless
Cordless
Rechargeable
Yes
Voltage
18V
Length
11.4000 cm
Width
8.1000 cm
Height
18.9000 cm
Write Your Own Review